Hydraulic Presses

Today "SANTEC" has attained an eminent position in the Hydraulic Presses because of continous R & D for a wide spectrum of applications, our machinery satisfy the needs of customers all over the world.

No wonder people say "SANTEC" is synonymous with "Better - Engineering" just erect & start reaping your profits. Try us ! we have the experience & expertise you are looking for.

Applications :	Frame Structures :
» Deep Drawing Operations » Blanking & Punching Riveting » Stamping & Pressing » Powder Compacting » Other Applications i.e. FRP, SMC, DMC, Rubber & Plastics etc.	» 'H' TYPE OR fabricated 4-column type » 'C' type » 4-pillars (Hard chrome pillars type)

Range :	Operation Mode :
» 5 TONS TO 5000 TONS CAPACITY	» FULLY AUTOMATIC 'PLC'-Controlled » CONTACTORS/ Relay Based.

Types of Hydraulic Presses
The range of Hydraulic Press we offer are as follows :

Gate or 'H' Type Press for Deep Drawing	Hydraulic Press for Deep Drawing	C- Frame Type Press
Click for Enlarged View	Click for Enlarged View	Click for Enlarged View

Hydraulic Deep Draw Press with Bottom Cushioning Click for Enlarged View Hydraulic Deep Drawing Press for LPG cylinders Halves Hydraulic Press For Pressing Operations Hydraulic Press for SMC ,DMC Click for Enlarged View C' Frame Type Presses 4 - Nos Hard Chrome Pillars Type Presses

Deep Drawing Press
'Santec' is a leading manufacture of deep Drawing presses (Triple Action, Double Action, with Bottom Cushioning Press) in India. Presently, these presses are widely used for S.S Sinks, Bath tubs, Surgical items, Automobile parts etc across the' world.

Hydraulic Punching Presses:
These presses are available in C-frame, 4-Pillars, 'H' type designs as per customers' requirements & can be used for punching operations in Industrial chains, Automobile parts etc.

Hydraulic Trimming Presses:
Can be produced as per customer's specifications & requirements for any kind of trimming operations for die-casting products, plastic sheets, etc. Please forward your technical specifications to get the offer for the press.

Powder Compacting Presses:
'Santec' produces these presses for wide, variety of applications. These presses have ability to dwell under pressure, have variable ram speeds & provide high tonnage in a smaller area.
Please submit your technical details to get the offer from our side.

Shaft Straightening Presses:
These presses are available in 'C'- frame & range varies from 5 Mt to 100 Mt manual & auto, both operation. Ram speed according to the customer's requirements.

Hydraulic Blanking Presses:
These presses are used for blanking operations in all kind of sheet material may be aluminum, mild steel or S.S, the tonnage is selected according to the blank size & material.

S.S Kitchen Sink Drawing Presses:
These are most popular presses of 'Santec' & have already been used by all leading manufactures of kitchen sinks across the world. They are available in Double Acting & Single Action design with Bottom Cushioning arrangement.

Triple Compression Deep Drawing Presses:
These presses are used where components are difficult to draw in double action type deep draw presses. Many customers are using these presses for Geyser Body.

Hydraulic Coining Presses:
These are available in 'C' type & 'H' type frame & capacity upto 500 tones capacity. These presses can be designed & manufactured as per customer's specifications & requirements.

Bath Tubs Drawing Presses:
These are also most popular ranges of press in 'SANTEC' family & used to produce S.S bath tubs.

Compression Molding Presses:
These are available in more tlink& employ all latest features to suit wide range of Industrial applications. For more information click here

H' Frame Type Presses or 4 - columns type Presses
These Presses are heavy duty & the frame is fabricated by ultrasonically tested quality profiles & plates of suitable thickness to withstand the load during operation & longer life of the press. These Presses can be used in deep drawing compression moulding of various kind of materials etc.

Salient Features of these H Presses

These Presses provide fast approach (upto 300 mm / sec) slow pressing & fast return speed. Press frames are rugged, steel unit of greater strength & rigidity. The change in speed can be manually preset to take place at any point of the stroke with the help of limit switches / proximity switches & potentiometer or transducers. The frames are stress- relieved by ultrasonic vibrators. Maximum frame rigidity is achieved through computer aided frame design & finite element analysis. Extra long, precision machined & hardened guides to face slides offer exceptional accuracy & alignment which further reduced to wear. The low noise hydraulic power pack unit is designed as per International practices & assembled with internationally reputed make components. The presses are designed as per ISI guidelines, hence standard seals, bushes are used with lubrication arrangement. PLC can be provided in the press as per customers requirement i.e. Allan Bradley, Mitsubishi, Omron make. These offer maximum production flexibility & full compatibility with international standards. Precise machining of the structural members is done after normalizing to get the required accuracy like parallelism between platen & bed & right angularity between bed the moving platen. Lubrication - Ram slides / guides / guide bushes are lubricated from a centralized lubrication arrangement. Moving Platen or Sliding Platen : It is a fabricated heavy duty & of higher thickness for better guidance, tester welded plate construction for highest stiffness under heavy loads. The whole platen is stress - relieved after welding T Slots provided in the platen are as per DIN Standards hydraulic or mechanical ejector pins to operate form inside the ram is also provided as optional on request or depending on the application. Die transfer Rails or Bolster Sliding arrangement is also provided as optional in front side of the press for heavy tolls applications

C' Frame Type Presses :

» These presses offers maximum access to tool area for tool changing & component feeding aplications.
» Range : 5 Tons to 300 Tons capacity.
» Slides guidance can be either twin pillars type or face slides.
» Hydraulic power pack is inbuilt & all valves are manifold mounted for easy & quick maintenance & a pressure relief valve protects against overloading of the press.
» Additional equipments:
· Ejectors in either the slide or under the press bed.
· Die cushioning arrangement for deep drawing.

4 - Nos Hard Chrome Pillars Type Presses:

» The guidance of this press offers excellent slide accuracy of the moving ram. Platen, resulting in reduced tool wear & an increased tool life.
» Slide move on larger size phosphorous bronze / ultra bronze bearing mounted at each corner with suitable lubrication arrangement a proper sealing arrangement at both side of each bush is also provided.